If you want to use the patient’s urine as a biological filter, take the coil cord that is attached to the gauze covered
cylinder the patient is holding and remove it from the gray-white remote input and plug it into any small hole in the round circular base of the Duplicating Well. Make sure one red
wire from the Duplicating Interface Box is also plugged into the base.
Plug the other red wire from the Duplicating Interface Box into the same gray-white remote input hole where you just
removed the gauze-wrapped cylinder.
Place the patient’s urine specimen into the Duplicating Well and cover.
Move the arrow to Single Remedy Analytical Assessment.
The following menu choices are unique to this program:
Auto-Threshold: The automatic default setting is10. This puts a limit on the level of
reading that will be recorded. Anything below the Lo-Limit will not be recorded.
The choices are: Lo Limit -10, Lo Limit -15, Lo Limit -20, and Lo Limit -25.
Electrode-Type: The default setting is 2 mm Brass. The choices are: 2 mm <BRASS>,
3 mm <BRASS>, 4 mm <BRASS> and <Platinum Gold>.
Use the arrow to set the: Audio, Potency or Sample.
IMPORTANT: Make sure the Polarity Meter is set at 000.
To get an initial reading of the energy of the point to be tested in the clear, move the arrow to Next Test, press
the key once and release. This causes Next Test to become highlighted in blue. The Next Test remains highlighted in blue during the testing process.
On the screen, you will see the statement, Type Test Remedy Name. Use the keyboard to type the word Clear, because you
want to record the initial reading of the point you will be testing for future reference, without any interaction of a substance. Press the Enter Key.
The screen will generate another statement, Type Test Point Name. Use the keyboard to type in the name of the point you
will be testing. Press the Enter Key. Your choices will appear in the appropriate boxes.
The Test On will come on the screen in the Diagnose Box showing the Synchrodyne is ready to measure the energy of the
point.
Locate the point to be tested and test.
Once the test ends after 7-8 seconds, the results will be displayed in the appropriate boxes. Retest this point two or
three times to determine the reproducibility and accuracy of your measurements. Once you can reproduce your test numbers 2-3 times in a row with no more than a 3 point difference in
the measurements you are ready to test substances.
Now move the arrow to Next Test, press the key once and release. This causes Next Test to become highlighted in blue.
Place the substance or remedy on the Testing Platform in one of the well inserts that you want to test. Place the remedy on the Testing Platform. The entire Testing Platform is
active.
The Next Test remains highlighted in blue during the testing process.
On the screen, you will see the statement, Type Test Remedy Name. Use the keyboard to type in the name of the remedy or
substance. Press the Enter Key. The screen will generate another statement, Type Test Point Name. Use the keyboard to type in the name of the point you will be testing or just press
the Enter Key so that the space is blank. You are still on the point you originally typed in.
The test in the clear that you just did will show the point you are testing when you print. If you change points, type in
the new point to keep your records accurate and results organized.
The Test On will come on the screen in the Diagnose Box showing the Synchrodyne is ready to measure the energy of the
point.
Locate the point to be tested and test.
Once the test ends after 7-8 seconds, the results will be displayed in the appropriate boxes.
If you want to test different potencies for any homeopathics you are testing, choose the desired potency from the
pull-down menu, set the Tune Relative Intensity Meters with the correct number code, access the Next Point option, press the Enter Key twice, once when the question about Remedy
appears and again when the question about Point comes on the screen.
Access the point and test. The results will be recorded and printed out if desired.
If you want to test other substances or remedies, follow steps 14-21.
To get a print out, move the arrow to Print, hold the key down and move the arrow to Type Report, and release. The
printer will provide you with a hard copy of the test results and automatically return you to the Main Menu.
If you do not want a print out of the results, go to the Exit option, move the arrow to Yes, and release to exit.
IMPORTANT: If you do not print out the results and go out of the program you will lose all of the test results.
Click Here to sign up for the monthly HealthyDoctors Insight Newsletter.
©Copyright 2003 HealthyDoctors.com * All Rights Reserved
Office 619-990-9492 * E-mal: info@healthydoctors.com