Synchrodyne Electro-acupuncture Training Manual Chapter Ten "Selected Control Point Testing."

Home|Health Articles|Hall Of Fame|Useful Links

 

Click Here to vote for the topics you want the know more about.

Click Here to sign up for the monthly HealthyDoctors Insight Newsletter.

 

Would you like to exchange links with our website?
 Click here and send us your website information.

 Alternative Health and Complimentary Medicine Directory

  

 SELECTED CONTROL POINT ASSESSMENT

  1. Now that you have tested the patient's CMPs and saved the abnormal points in the Control Point Testing area, you are ready to discover the remedy that will restore balance in one or more points that are abnormal.

  2. To use the patient’s urine as a biological filter during testing, take the coil cord that is attached to the gauze covered cylinder the patient is holding and remove it from the gray-white remote input. Plug it into any small hole in the round circular base of the Duplicating Well. Make sure one red wire from the Duplicating Interface Box is also plugged into the base.

  3. Plug the other red wire from the Duplicating Interface Box into the same gray-white remote input hole where you just removed the gauze-wrapped cylinder. Place your foot on the Foot Switch and depress. Touch the tip of the testing probe to the metal Hand Cylinder. You should hear a high pitched sound to show everything is hooked up correctly. If you do not hear the high pitched sound, check your connections.

  4. Place the patient’s urine sample into the Duplicating Well and cover.

  5. Move the arrow to the Selected Control Point Assessment in the Main Menu and press the key. You will come to a screen that shows you all the out-of-balance points you held and saved in the Control Point Testing Area.

  6. Evaluate which point related to a major organ system is the most out-of-balance by checking the inflammation, degeneration and indicator drop. Usually, you will test the most inflamed major organ system with the biggest indicator drop.

  7. Click once on the point that is most out-of-balance and this will take you in to the next testing screen.

  8. The red menu line gives you a number of commands that allow you to do different things. The commands that are listed below can be accessed by moving the arrow to the option, pressing the key once, and releasing:

  • Up: The previous screen will appear.

  • Down: The next screen will appear.

  • New Point: Allows you to return to the previous menu, so you can choose another point

  • or print out the testing results.

  1. The following commands require you to hold down the mouse key to see the options in that category, that appear under the command in a pull down window. To choose an option, you must keep the key depressed and move the arrow down to your desired selection and then release:

  • Audio: Allows you to select the Pitch of the sounds you will hear when testing points.
  • You may choose Multiple Pitch  50X, Multiple Pitch 100X, Multiple Pitch 250X,
  • Multiple Pitch 500X, or Audio Sound Off (Default Setting).
  • Potency: Allows you the opportunity to change the potency of the homeopathic on the
  • testing platform, by changing the settings on the Tune Relative Intensity Meters. The
  • choices are: 5X DIAL 521-821, 6X DIAL 311-632, 8X DIAL 581-455, 10X DIAL
  • 743-291, 12X DIAL 388-711, 15X DIAL 501-861, 30X DIAL 951-822, 60X DIAL
  • 591-475, 100X DIAL 773-201, 200X DIAL 338-791, SAMPLE  DIAL 000-000.
  • IMPORTANT: MAKE SURE THE POLARITY METER IS SET AT 000.
  • When you change the Tune Relative Intensity Meters, the Synchrodyne will reproduce
  • the unique electro-magnetic fields associated with each potency. The different
  • potencies generated are irrespective of  the specimen or specimens on the Testing
  • Platform. If you want to test the sample directly at its' own particular potency, set the
  • Tune Relative Intensity Meters to 000-000. 
  • Remedy Plane: Lets you choose all of or specific testing wells on the Testing Platform.
  • Your choices are: Cylinder Set - 1, Cylinder Set - 2, Cylinder Set - 3 or All in
  • Operation.            

  1. Test results will appear in the following areas after each test:

  • Up Time: Registers the amount of time required to achieve the highest reading.
  • Down Time: Records the time required for the point to achieve its lowest reading.
  • Maximum: Is the highest energy reading obtained.
  • Minimum: Is the lowest energy reading obtained.
  • Indicator Drop: This does not appear on the screen. It is a result of subtracting the Minimum reading from the Maximum reading. The Indicator Drop provides valuable information about the body's ability to restore electrical homeostasis at the point being tested.

Tested Reference: This box will show the original test results of the point you have chosen for the purpose of finding a remedy.

IMPORTANT: Always wear latex or rubber gloves when you are handling the homeopathics so your energy does not contaminate the purity of the testing substances.

  1. Load the remedy vials of Universal Sets #1, #2, and #3 into 3 multi-holed well-inserts. Place the Universal Tray #1 remedies into one, the Universal Tray remedies #2 in another, and the Universal Tray #3 remedies in a third.

  2. Now place the well insert with Universal Tray #1 in Set 1 on the Testing Platform, Universal Tray #2 in Set 2, and Universal Tray #3 in Set 3. Place cylindrical well-covers over the multi-hole well inserts with the Universal Trays in them, to protect the substances from ambient electromagnetic radiation.

  3. Set the Pitch of the Audio option at this time.

  4. Set your Potency. Hold down the mouse key, and drag the arrow down to 6X. Dial into the Tune Relative Intensity Meters 311-632.

  5. Release the key when you are sure you have dialed in the correct set of numbers.

  6. Make sure the Polarity Meter is set at 000.

  7. To test all the remedies in Universal Trays #1, #2, and #3, at one time, at 6X, move the arrow to Remedy Plane, hold down the key, move the arrow to All in Operation, and release.

  8. Move the arrow to the rectangular box containing Holder Set #1, #2, #3, and select with the mouse key by clicking it once and releasing. The box become highlighted, showing you have activated the test recording function and are now ready to test.

  9. Give the patient the moistened, gauze-covered hand-held cylinder. Have them hold it in the hand opposite the side being tested. Use a wet cotton ball to moisten the point being tested. Change cotton balls and gauze with each patient.

  10. Place your foot on the Foot Pedal and push down until you get the humming sound. Continue to keep it depressed.

  11. Use the 2mm probe tip to locate the point to be tested. The point is identified at the bottom of the screen in the red Tested Reference box. Refer to the hand/foot charts if you cannot remember where it is located.

  12. Once you locate the point, keep a firm, steady pressure. Concentrate on looking at the tip of the probe contacting the exact location of the point. Make sure you can make the WEE-WEE sound consistently.

  13. Look only at the point being tested on the patient’s body. If you look at the screen, your readings will not be accurate. You will change pressure or slip off the point. If you change pressure or move off the point, the Synchrodyne will either give you a negative, zero, or very low reading. You will also hear abnormal noises that can sound like someone is playing a strange tune, if you move off the point or your pressure change is too great, signaling that you must retest the point.

  14. Take your foot off the Foot Pedal to begin the test. It will last for about 8 seconds. When the test is completed, the results will appear in the rectangular box.

  15. IMPORTANT: Once the test starts, you must wait the entire eight seconds before you can retest.

  16. Evaluate the result of the test and decide if the Maximum and Minimum readings are closer to 50 and the Indicator Drop is less than the original test results that are listed in the Tested Reference box at the bottom of the screen. If the new test results are superior to the original go to Step 34 to start testing the Cylinder Sets individually.

  17. If there is no improvement, then access the Potency pull down menu and select 12X and enter the numbers 388-711 into the Tune Relative Intensity Meters. Reselect Holder Set 1,2,& 3 to record the test. Retest the point against the Universal Trays #1, #2, & #3 remedies at 12X. The reading will replace the previous one, but all tests will be printed out at the end of the testing.

  18. Evaluate the new test results. If they are superior to the original start testing the Cylinder Sets individually. Go to Step 34.

  19. If there is no improvement, then change the Potency to 30X and enter the numbers 951-822 into the Tune Relative Intensity Meters.  Reselect Holder Set 1,2,& 3 to record the test. Retest the point against the Universal Trays #1, #2, & #3 remedies at 30X.

  20. Evaluate the new test results. If they are superior to the original go to Step 34 to start testing the Cylinder Sets individually. If there is no improvement, then change the Potency  to 60X and enter the numbers 591-475 into the Tune Relative Intensity Meters. Reselect Holder Set 1,2,& 3 to record the test. Retest the point against the Universal Trays #1, #2, & #3 remedies at 60X.

  21. Evaluate the new test results. If they are superior to the original, go to Step 34 start testing the Cylinder Sets individually. If there is no improvement, then change the Potency to 100X and enter the numbers 773-201 into the Tune Relative Intensity Meters. Reselect Holder Set 1,2,& 3 to record the test. Retest the point against the Universal Trays #1, #2, & #3 remedies at 100X.

  22. Most often, Universal Trays #1, #2, & #3, when tested as a group at these different potencies, will create a greater balance in the point. Even if there is only a slight improvement, once you test the Universal Trays individually, you will see an even greater balancing. If in the rare case where the Universal Trays do not initially balance, go to Step 59. If there is improvement, go to step #34.

  23. Move the arrow to Remedy Plane and choose Cylinder Set 1. Move the arrow to the box containing Holder Set 1and select it by pressing the key and releasing. You can now test the Universal Tray #1 remedies that are in Set 1. The results will be recorded in Holder Set 1.

  24. Move the arrow to Remedy Plane and choose Cylinder Set 2. Move the arrow to the box containing Holder Set 2 and select it by pressing the key and releasing. You can now test the Universal Tray #2 remedies that are in Set 2. The results will be recorded in Holder Set 2.

  25. Move the arrow to Remedy Plane and choose Cylinder Set 3. Move the arrow to the box containing Holder Set 3 and select it by pressing the key and releasing. You can now test the Universal Tray #3 remedies that are in Set 3. The results will be recorded in Holder Set 3.

  26. Determine which Universal Tray provided the greatest balance.

  27. Remove the other two Universal Trays from the Testing Platform.

  28. Take the Universal Tray that balanced and divide it up into three groups of 7 vials. Place each group of seven vials into a separate well insert and place one on the Testing Platform on Set 1, another on Set 2 and the third on Set 3. Cover them with the well covers.

  29. Move the arrow to Remedy Plane and choose Cylinder Set 1. Move the arrow to the box containing Holder Set 1 and select it by pressing the key and releasing. You can now test the seven Universal remedies that are in Set 1. The results will be recorded in Holder Set 1.

  30. Move the arrow to Remedy Plane and choose Cylinder Set 2. Move the arrow to the box containing Holder Set 2 and select it by pressing the key and releasing. You can now test the seven Universal Tray remedies that are in Set 2. The results will be recorded in Holder Set 2.

  31. Move the arrow to Remedy Plane and choose Cylinder Set 3. Move the arrow to the box containing Holder Set 3 and select it by pressing the key and releasing. You can now test the seven Universal Tray remedies that are in Set 3. The results will be recorded in Holder Set 3.

  32. Determine which of the new test results is most superior to the original. Remove the other two groups of seven remedies from the Testing Platform.

  33. Take the group of seven that provided a greater balance and divide it up into two groups of two vials and one of three vials. Place each of the groups of vials into a separate well-insert and place one group on Set 1, another on Set 2 and the third on Set 3. Cover them with the well-covers.

  34. Move the arrow to Remedy Plane and choose Cylinder Set 1. Move the arrow to the box containing Holder Set 1 and select it by pressing the key and releasing. Test. The results will be recorded in Holder Set 1. 

  35. Now move the arrow to Remedy Plane and choose Cylinder Set 2. Move the arrow to the box containing Holder Set 2 and select it by pressing the key and releasing. You can now test the two or three remedies in Set 2. The results will be recorded in Holder Set 2.

  36. Now move the arrow to Remedy Plane and choose Cylinder Set 3. Move the arrow to the box containing Holder Set 3 and select it by pressing the key and releasing. You can now test the two or three remedies in Set 3. The results will be recorded in Holder Set 3.

  37. Determine which group creates the greatest balance. Take the other two groups off the Testing Platform and place them with the others of the same group.

  38. Place one of the remedies that created the greatest balance into multi-hole well insert in  Cylinder Set 1 on the Testing Platform.

  39. Go to Remedy Plane and Select Cylinder Set 1. You will test the last two or three remedies in Cylinder Set 1. You will not have to go to Remedy Plane again.

  40. Use the Down menu choice to go to the exact name of the remedy. Use the color coding on the bottle to help you find the remedy.

  41. Click on the name of the remedy to turn on the box to record the results and then test the remedy against the point.

  42. Take that remedy off the Testing Platform and set it where you will not loose it. Place the second remedy into multi-hole well insert in  Cylinder Set 1 on the Testing Platform.

  43. Use the Up or Down menu choices to find the location of the remedy’s name and then click on that box. Test. The test results will appear in the box that identifies the remedy.

  44. If there is a third remedy, remove the remedy on the Testing Platform and place the third remedy into multi-hole well insert in  Cylinder Set 1 on the Testing Platform.

  45. Use the Up or Down menu choices to find the location of the next remedy and then click on the name. Test.

  46. Now evaluate the results and determine which of the two or three remedies brings the point listed in the Reference Area at the bottom of the page into the greatest balance. That one remedy is the best one for the patient. If the tests are not an improvement, change the potency and retest each remedy until you find a remedy  and potency that works.

  47. Once you find the correct remedy at the best potency go to New Point and click on it once to return to the previous menu that has the Print option. Select the Print with the mouse key held down and drag down to Type Report.

  48. If there was no improvement when testing the three Universal trays as one group at the different potencies, then remove Universal Trays #1, #2, & #3 from the Testing Platform and load a multi-holed well-insert with the Specific Meridian Tray of the meridian you are testing.

  49. Place the Specific Meridian Tray into Set 1 on the Testing Platform, choose a Potency of 6X, enter into the Tune Relative Intensity Meters the numbers 311-632, go to the Remedy Plane, choose Set 1, and then use Down to move to the very last of the remedy lists where the Specific Meridian Tray is listed. 

  50. Place the arrow on the rectangular box that lists the meridian you want to test and then click the mouse key once and release to select this box for testing. Test. If there is an improvement in the reading, divide the tray up into three sets of 7 and test each group, recording the results in Holder Set 1, Holder Set 2 and Holder Set 3, narrowing them down to smaller groups until you find the best remedy. When you get down to the last few remedies, they are listed according to the code on the bottles.

  51. If there is no improvement, then change the Potency to 12X, 30X, 60X and 100X to see if a different potency works. If a different Potency works go back to Step 61 and find which remedy is the best.

  52. If changing the Potency did not make a difference, remove the Specific Meridian Tray from the Testing Platform and load a multi-holed well-insert with any of the other meridian trays listed below: Lymph Tray #A, Lung Tray #B, Large Int. Tray #C, Nerve Degen. Tray #D, Circul./Heart Tray #E, Allergy Tray #H, Endocrine/Sm.In. Tray #J, Spleen 1 Tray #K, Spleen 2 Tray #K, Liver/Pancreas Tray #L, Jnt./Sk./Fb./Ft.Dg. Tray #N, Stom./Gl Bladder Tray #P, Kidney/Bladder Tray #S and Group Specific Tray #.

  53. Place the new meridian tray into Set 1 on the Testing Platform and cover.

  54. Set the Potency at 6X, go to the Remedy Plane, choose Set 1, and then use Down to move the arrow to the name of the meridian tray in Set 1. Place the arrow on the rectangular box that lists the meridian you want to test in Set 1 and then click the key once and release to select this box for testing. Test.

  55. If there is no improvement in the balance of the point, change the Potency and retest at the 12X, 30X, 60X and 100X. If there is improvement, divide the tray up and find the remedies that work. Go to Step 68.

  56. If that remedy tray did not work at the different Potencies, repeat Step 63-66. Tray as many new Meridian trays as required until you find one that balances.

  57. Once you find a tray of remedies that improves the original reading, divide the tray into three groups of 7 vials. Place each of the seven vials into a separate well insert and place one on Set 1, another on Set 2 and the third on Set 3. Cover them with the well covers.

  58. Move the arrow to Remedy Plane and choose Cylinder Set 1. Move the arrow to the box containing Set 1 and select it by pressing the key and releasing. You can now test the seven remedies that are in Set 1.

  59. Move the arrow to Remedy Plane and choose Cylinder Set 2. Move the arrow to the box containing Set 2 and select it by pressing the key and releasing. You can now test the seven remedies that are in Set 2.

  60. Move the arrow to Remedy Plane and choose Cylinder Set 3. Move the arrow to the box containing Set 3 and select it by pressing the key and releasing. You can now test the seven remedies that are in Set 3.

  61. Evaluate the results of the tests and decide that group tested the best. Remove the other two groups of seven remedies from the Testing Platform.

  62. Take the group of seven that provided a greater   balance and divide it up into two groups of two vials and one of three vials. Place each of the groups of vials into separate well inserts and place one group on Set 1, another on Set 2 and the third on Set 3. Cover them with the well-covers.

  63. Move the arrow to Remedy Plane and choose Cylinder Set 1. Move the arrow to the box  containing Set 1, select it and then test the two remedies that are in Set 1. The test results will write over the top of the reading that is in the box that is no longer of value.

  64. Move the arrow to Remedy Plane and choose Cylinder Set 2. Move the arrow to the box containing Set 2, select it and then test the two remedies that are in Set 2.

  65. Move the arrow to Remedy Plane and choose Cylinder Set 3. Move the arrow to the box containing Set 3, select it and then test the two or three remedies that are in Set 3.

  66. Evaluate the results of the tests and decide which group of remedies created the most balanced reading, compared to the original test result that is listed in the Tested Reference box at the bottom of the screen.

  67. Remove the other two groups of remedies from the Testing Platform. Now it is time to test the remaining individual remedies one at a time. Take each of the remedies and place each into a different Cylinder Set on the Testing Platform. The name of this remedy is not listed. Only the remedies for the Universal Trays and the Specific Meridian Tray are listed.

  68. Move the arrow to Remedy Plane and hold down the key, move the arrow to Set 1 and release the arrow to select. Select Holder Set 1 to record the test. Test.

  69. Move the arrow to Remedy Plane and hold down the key, move the arrow to Set 2 and release the arrow to select. Select Holder Set 2 to record the test. Test.

  70. If there is a third remedy, move the arrow to Remedy Plane and hold down the key, move the arrow to Set 3 and release the arrow to select. Choose Holder Set 3 to record the results. Test.

  71. Decide which remedy created the greatest balance. Write it’s name on a piece of paper and you are finished. If the tests did not show any improvement in the original reading, test all three or two at different potencies until you find the one that is the best. Use the Potency menu option in combination with entering the required numbers into the Tune Relative Intensity Meters to select different potencies. When you are through go to New Point and click to get to the Print option. Click on Print and drag down to Type Report.   

 

 

Home|Health Articles|Hall Of Fame|Useful Links

Click Here to vote for the topics you want the know more about.

Click Here to sign up for the monthly HealthyDoctors Insight Newsletter.

 

Disclaimer |Terms Of Use |Privacy Policy

©Copyright 2003 HealthyDoctors.com * All Rights Reserved  
Office 619-990-9492  *  E-mal: info@healthydoctors.com