How To Test Patients With The Synchrodye 520 Electro-Acupuncture Point Electrodermal Evaluation Instrument Synchrodyne Electro-acupuncture Training Manual Chapter Five Mouse Information.

Synchrodyne Electro-acupuncture Training Manual Chapter Six "Turning On The Synchrodyne System."

Home|Health Articles|Hall Of Fame|Useful Links

Click Here to vote for the topics you want the know more about.

Click Here to sign up for the monthly HealthyDoctors Insight Newsletter.

Would you like to exchange links with our website?
Click here and send us your website information.

Alternative Health and Complimentary Medicine Directory

TURNING ON THE SYNCHRODYNE SYSTEM

MAKE SURE THE SYNCHRODYNE, CPU, AND PRINTER ARE OFF!!!!!
Plug the surge suppressor into the wall outlet.
Turn on the On switch of the surge suppressor.
Make sure the surge suppressor is functioning correctly. Reset it with the reset switch if there is any question.
Push in the ON/OFF button on the front of the CPU to turn it on.
Turn on the monitor by pressing the ON/OFF on the front of the monitor.
The monitor screen will show the computer going through its diagnostics. It will tell you what to do if there is a problem. In most cases turning off the computer and restarting will solve any problem. Eventually, the C:\> will appear.
Now and only now turn on the Synchrodyne by moving the switch to on.
Press the ON/OFF switch to turn the printer On.
Use the keyboard to type, SYNCHRO and then press the Enter Key. If a mistake is made in typing, use the Backspace Key to move the flashing cursor backwards to erase all the letters up to and including the mistake. Once the mistake is corrected, finish typing SYNCHRO correctly. If you made a mistake in spelling SYNCHRO and pressed the Enter Key, the screen will show Bad Command on one line and the C:\> will appear on the next line. Just type in SYNCHRO and press the Enter Key.
The Synchrodyne will show bouncing colored balls. Then a screen comes on that warns you to set the Tune Relative Intensity Meters to all zeroes and press all the Reset Buttons before you do the Instrument Calibration. Use mouse to select the “Continue” Box.
The Synchrodyne graphics display will come onto the screen automatically and graphs will show you how the instrument monitors all the radiation and EMF that is radiating the site of testing. Eventually, the Main Menu will appear on the screen:

INSTRUMENT CALIBRATION

NEW PATIENT DATA ENTRY

CONTROL POINT TESTING

REMEDY BY AREA TESTING

SINGLE REMEDY ANALYTICAL ASSESSMENT

SELECTED CONTROL POINT ASSESSMENT

SERVICE REMEDY EDITOR

SYSTEM TUTORIAL

EXIT PROGRAM

Home|Health Articles|Hall Of Fame|Useful Links

Click Here to vote for the topics you want the know more about.

Click Here to sign up for the monthly HealthyDoctors Insight Newsletter.

Disclaimer |Terms Of Use |Privacy Policy