Take the coil cord that is attached to the gauze covered cylinder the patient is holding and remove it from
the gray-white remote input and plug it into any small hole in the round circular base of the Duplicating Well. Make sure one red wire from the Duplicating Interface Box is also
plugged into the base.
Plug the other red wire from the Duplicating Interface Box into the same gray-white remote input hole where
you just removed the gauze-wrapped cylinder.
At the C:> type WIN and hit the enter key.
Double click the left mouse button when the tip of the arrow is on the Duplication Program Icon that looks
like a little world.
The “Synchrodyne Expanded Platform” window appears. You move the mouse arrow to the Duplex Icon that is at
the top left of the screen. It looks like two colored flasks in a black box. Click the left mouse key once to select.
Click OK in the information box with the statement, “Your instrument with all attachments must be on the
line prior to the initialization or all of your results may be compromised.”
Move the mouse arrow to the Initiation File Box and click the left mouse key once.
An Information Box will appear “There is no Point.TST file in this directory.” Move the mouse arrow to the
OK Box and click left key once.
A Select Point.TST Box will appear. Move the mouse arrow to the little yellow folder icon next to the C:\
and double click the left mouse key to open the list of directories on the C:\ drive. You want to select the Synchrodyne directory.
Move the mouse arrow to the small black Down Arrow at the bottom of this box and click on it a number of
times until the list of directories scrolls down where you see the Synchrodyne directory next to small yellow folder.
Click once on the Synchrodyne folder and it will turn blue.
Click OK once to open the Synchrodyne folder.
Click OK to go back to the Duplication Array Setup.
Click once on the Initiation File Box.
Click on any point in the Energetic Reference Box and the location of the point will appear in a gray box on
the screen with the red dot identifying the spot to place the probe tip.
Click on the Vertical Stroke Technique and a black dot will appear.
Place the patient’s urine sample on the testing platform in one of the Cylinder Sets and cover. Make sure
their homeopathic remedy is on the testing platform and also covered.
Place the glass dropper bottle that has a label on it to identify the patient, dosage and remedy name in the
Duplicating Well and Cover.
Have the patient hold the gauze-covered cylinder in their hand. Make sure it is still wet.
Put your foot on the Foot Switch. Wet the skin with the cotton ball and then locate the point shown in the
picture, make the WEE-WEE sound and then take your foot off the Foot Switch.
Watch the Energize Button on the screen and as soon as the energy of the patient and remedy is entered into
the circuits, the light will turn green. The system is now ready to make the remedy and transfer the energy into the bottle of water.
Take the probe off the patient’s point, but keep the hand cylinder in their grasp.
Position the mouse arrow on the green Energize Button and Click once with the left mouse key. Wait until the
green light goes back to gray before you take the hand cylinder from the patient. This completes the process of transferring the energy.
To make another remedy with a different potency for the same patient, change the numbers on the Tune
Relative Intensity Meters to match the setting required to create that potency, label a new dropper vial and place it in the Duplicating Well and cover. The settings for the different
potencies are listed on the Testing Platform. Follow Steps 15-23.
To make a remedy using another homeopathic medicine, remove the one that is on the testing platform, replace
it with the one you want to make, place a new dropper bottle that is labeled with the remedy’s name in the Duplication Well and Follow Steps 15-23.
To make a remedy for a totally different patient, clear the Testing platform of everything, place the new
urine sample on the Testing Platform along with the homeopathic remedy you want to duplicate and follow Steps 15-23.
Now that you are done duplicating remedies and you want to quit, move the mouse arrow to the Cancel Box and
click once with the left mouse key to return to the “Synchrodyne Expanded Platform” window.
Move the mouse arrow to the Program Manager Icon at the bottom of screen and double click to turn to the
Program Manager Window.
Move the mouse arrow to the File menu choice at the top of the screen and Click once. A drop down box will
appear with multiple choices.
Click once on the Exit Program choice.
Click once on the OK Box to end the windows session and return back to the C:>. You can now return to the
Synchrodyne program by typing SYNCHRO and hitting the Enter key once. If you want to turn off the system, first turn off the Synchrodyne, then the computer, monitor and finally the
printer.
NOTE: IF COLOR BALLS OF THE SPECIAL SCREEN SAVER APPEAR ON THE SCREEN, MOVE THE MOUSE AND THEY WILL
DISAPPEAR.
Click Here to sign up for the monthly HealthyDoctors Insight Newsletter.
©Copyright 2003 HealthyDoctors.com * All Rights Reserved
Office 619-990-9492 * E-mal: info@healthydoctors.com